Connections & Setup
Ringer Tone
1.Press the Prog/Flash button until RINGER TONE 1 shows in the display.
2.Use the CID/Vol ( 5 or 6 ) buttons or the handset number pad to select and listen to a ringer tone. There are seven ringer tones to choose from. The default setting is 1.
3.Press the Prog/Flash button to confirm. You will hear a confirmation tone.
Ringer Volume
1.Press the Prog/Flash button until RINGER VOL 1HI shows in the display.
2.Use the CID/Vol ( 5 or 6 ) buttons or the handset number pad to select 1 (HI), 2 (LOW), or 3 (OFF). The default setting is 1HI.
3.Press the Prog/Flash button to confirm. You will hear a confirmation tone.
Default Setting Selection
1.Press the Prog/Flash button until DEFAULT 1NO shows in the display.
2.Use the CID/Vol ( 5 or 6 ) buttons or the handset number pad to select 1 (NO), or 2 (YES). The default setting is 41NO. If you choose NO, the current settings remain. If you choose YES, the unit resets to the factory defaults.
3.Press the Prog/Flash button to confirm.
19
