One-touch Timer Recording (OTR)
The
NOTES: |
•If you wish to watch the DVD playback during the recording or the OTR, press DVD to change to DVD mode and perform the DVD playback.
•The channel cannot be changed during recording.
Preparation:
•Press TV/VCR to select the TV/VCR mode.
Example:
1 Load a cassette tape with the erase prevention tab intact.
The unit will automatically turn on.
2 Press SPEED to select the desired tape |
|
speed SP or SLP. |
|
The tape counter and SP or SLP will |
|
appear on the screen temporarily. | 00 : 00 : 00 SP |
3 Set the TV/CATV option to the appropriate position (See page 22).
| TV - VHF/UHF channels | |
| CATV - CABLE TV channels | |
|
|
|
4 Press Direct Channel Selection | CH 110 | |
|
| |
or CH +/– to select the channel to be |
| |
recorded. |
| |
5 Press REC/OTR. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours. The OTR and recording time will appear on the screen temporarily.
Press | Recording time | Press | Recording time | CH 125 |
|
|
|
| OTR 0 : 30 |
|
|
|
|
|
once | NORMAL REC | 6 times | 3:00 |
|
twice | 0:30 | 7 times | 4:00 |
|
3 times | 1:00 | 8 times | 5:00 | INDEX |
|
|
|
| |
|
|
|
|
|
4 times | 1:30 | 9 times | 6:00 |
|
|
|
|
|
|
5 times | 2:00 | 10 times | NORMAL REC |
|
To cancel OTR
Press STOP.
" 
" will appear on screen temporarily.
37
