Duplicating a video tape
Duplicating a video tape
If you connect the unit to another VCR or camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.
1 Load a blank cassette tape with the erase preven- tion tab intact into the recording unit.
Load a previously recorded tape into the playback VCR or CAMCORDER.
2 Press SPEED to select the desired tape speed SP or SLP.
It is recommended that you set the speed to the SP mode on the recording unit for best results.
3 Press INPUT SELECT to select AUDIO/VIDEO input position. "LINE 1" or "LINE 2" will appear on the screen.
LINE1: on the rear panel
LINE2: on the front panel
4 Press REC/OTR on the recording unit, then press
PAUSE/STILL.
5 Press the PLAY button on the playback VCR or CAMCORDER, then press the PAUSE/STILL button.
6 Release the recording pause and the playback still simultaneously to begin the duplicating process.
Connection with second Video recorder | Connection with Video camera | ||
Playback VCR | Playback Camcorder | ||
| |||
|
|
|
|
|
|
|
|
|
|
|
|
To AV Jack
To VIDEO OUT | To AUDIO (R) OUT |
|
| To AUDIO (L) OUT | Recording unit |
Recording unit |
| |
|
|
AUDIO/VIDEO
Cord (not supplied)
To VIDEO IN
VHF/UHF
DIGITAL AUDIO
To AUDIO (R) IN
To AUDIO (L) IN
| To AUDIO (R) IN |
To VIDEO IN | To AUDIO (L) IN |
AUDIO/VIDEO Cord (not supplied)
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.
42
