RCA 27F524T manual Using the Side Jacks, Your TV’s jacks might be different

Connections & Setup

Using the Side Jacks

VIDEO L AUDIO R

	If necessary,
	connect antenna
	or cable to get a
Side of TV	picture. Go to page
	5 for instructions.

Note: This front/side panel graphic is for representation only.

Your TV’s jacks might be different.

2	3
OUTPUT
		L	R
			AUDIO
L	R
VIDEO	AUDIO	S-VIDEO
		OUT

Video Game Console

Audio/Video

+•? ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

DIG•ANA

Connecting the Device

This connection allows you to connect a device, such as a video game console, that has Audio/ Video jacks. Refer to the illustration below which uses audio and video cables.

Using the example of a video game console:

1.Connect your cable and/or antenna as described on page 5.

2.Connect your video cable.

Video cables are usually yellow. Connect the Video cable to the Video jack on the side of the TV and the jack on the video game console.

3.Connect your audio cables.

Connect the audio (white and red) cables to the R and L Audio jacks on the side of the TV and to the audio output jacks on the video game console. Just match the colors.

4.(Optional) For models with an S-Video jack, you can use either the Video or the S-Video connection. You cannot connect both at the same time because they share the audio jacks. S-Video cables fit into a special shaped jack which is labeled S-Video. Connect the S-Video cable to the jack on the side of the TV and the jack on the video game console. Connect the audio cables.

Viewing the Picture from the Connected Device

The device in this example, a video game console, is connected to the TV’s video and audio jacks located on the side of the TV. To view the video game console:

1. Turn on the TV and the video game console.

2. Press the INPUT button on the remote control to toggle through the Video Input Channels until FRNT is displayed in the channel banner.

INPUT button

Chapter 1