Using the TV’s Features
Set VCR Channel Displays a list that lets you set up the channel that the TV tunes to when you press the VCR button on the remote.
Set DVD Channel Displays a list that lets you select the channel that the TV tunes to when you press the DVD button.
Set SAT/CABLE Channel Not available with your remote control.
5.Highlight the choice that matches the way you have the component connected to this TV, and press OK.
The choices and a brief explanation follow:
SET SAT/CABLE CHANNEL
1 Not connected 2 Channel 2
3 Channel 3
4 Channel 4
5 Video Input 1
6 Video Input 2
Not connected Choose this if you donÕt have this particular component connected to the TV, or if you donÕt want the TV to automatically tune to the correct channel when youÕre using this component.
Channel 2 (SAT/CABLE only- Not available with your remote control).
Channel 3 Component is connected to the CABLE/ANTENNA jack on the back of the TV, and you want the TV to tune to channel 3 when you press the corresponding button on the remote. Reminder: make sure the componentÕs Channel 3/4 switch is set to channel 3.
Channel 4 Component is connected to the CABLE/ ANTENNA jack on the back of the TV, and you want the TV to tune to channel 4 when you press the corresponding button on the remote. Reminder: make sure the componentÕs Channel 3/4 switch is set to channel 4.
Video Input 1 Component is connected to the INPUT1 VIDEO jack on the back of the TV and you want the TV to tune to VID1 Input Channel when you press the component button.
Video Input 2 Component is connected to the INPUT2 VIDEO jack on the back of the TV and you want the TV to tune to VID2 Input Channel when you press the component button.
Note: You should choose Video Input 1 or 2 for your VCR if you connected it to the TV with audio/video cables.
22 | Graphics contained within this publication are for representation only. | Chapter 3 |
