Toshiba MW20FN3/R, MW24FN3/R Tuner setting, TV/CATV selection, Setting channels automatically

TV operation

Tuner setting

This unit is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the unit’s memory. In addition to normal VHF and UHF channels, this unit can receive up to 113 Cable TV channels. To use this unit with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

1,4

1,3

1-2

TV/CATV selection

Preparation:

• Press TV/VCR to select the TV/VCR mode.

1 Press MENU. Press or to select “CH SETUP”, then press ENTER.

MENU
SETUP	M E N U
	TIMER REC SET
	TV SETUP
	CH SETUP
ENTER	AUTO REPEAT ON OFF
	SYSTEM SETUP
	〈 / /ENTER/MENU〉

2	Press or to select “TV/CATV”.
		CH SETUP
		TV CATV
		AUTO CH MEMORY
	ENTER	ADD/DELETE
3		〈 / /ENTER/MENU〉
	Press ENTER to select the “TV” or “CATV”.
	The arrow indicates the selected mode.
	ENTER	CH SETUP
		TV CATV
		AUTO CH MEMORY
		ADD/DELETE
TV	- VHF/UHF channels	〈 / /ENTER/MENU〉
CATV - CABLE TV channels

4 Press MENU repeatedly until the menu screen is cleared.

MENU

SETUP

Notes:

•If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.

•You can’t select “CH SETUP” if you set the channel to “LINE1” or “LINE2”.

Setting channels automatically

1 Press MENU. Press or to select “CH SETUP”, then press ENTER.

MENU

SETUP	M E N U
	TIMER REC SET
	TV SETUP
	CH SETUP
	AUTO REPEAT ON OFF
	SYSTEM SETUP
ENTER
〈	/ /ENTER/MENU〉

2 Press or to select “AUTO CH MEMORY”.

	CH SETUP
	TV CATV
ENTER	AUTO CH MEMORY
	ADD/DELETE
	· / /ENTER/MENUÒ

3	Then press ENTER.
	The unit will begin memorizing all
	the channels available in your
	area. Channel numbers will
	remain red until auto memorizing
	is complete.
	AUTO	CH 002
	ENTER

4 Press MENU repeatedly until the MENU screen is cleared.

MENU

SETUP

26