Timer recording | TV/VCR | |
| ||
Timer recording can be programmed | ||
The | ||
| ||
programs within 1 month. | 6 | |
| 1 |
CANCEL
Timer recording
Preparation:
•Press TV/VCR to select the TV/VCR mode.
•Load a cassette tape with the erase prevention tab intact.
•Check the time and date are correct 22 .
Example:
Program a timer recording for 23rd day, channel 125 (CATV), 7:00 - 9:30 PM (Tape speed : SLP).
1 Press MENU. Press 
or 
to select “TIMER REC SET”, then press ENTER.
|
| M E N U |
|
|
| TIMER REC SET |
|
MENU |
| TV SETUP |
|
ENTER | CH SETUP | ON OFF | |
|
| AUTO REPEAT | |
|
| SYSTEM SETUP | |
SETUP |
| 〈 / /ENTER/MENU | 〉 |
|
| ||
2 Press 
or 
to select one of the program line, then press ENTER.
- | ||||
- | ||||
ENTER----- | - | |||
- | ||||
- | ||||
- | ||||
- | ||||
- | ||||
〈 | / /ENTER/CANCEL/MENU〉 | |||
Press |
| or | to select the date, then press | ||
3 ENTER. |
|
| TIMER REC SET |
| |
|
|
| DATE | 23 | (THU) |
|
|
| START | 8 | : 30 AM |
ENTER | END | ||||
|
|
| |||
|
|
| CH | 012 |
|
|
|
| SPEED | SP |
|
〈 /
/ENTER/CANCEL/MENU〉
4 Set the start time, end time, channel and tape speed as in step 3.
TIMER REC SET
DATE | 23 | (THU) |
START | 7 | : 00 PM |
END | 9 | : 30 PM |
CH | 125 |
|
SPEED | SLP | |
〈 /
/ENTER/CANCEL/MENU〉
Notes:
•Press CANCEL to move cursor backward for correction.
•To record from external source set the channel to “L1” or “L2”. “L1” or “L2” will appear next to CH 125 (or 69).
5 To set the timer for another program, press 
or 
until the number of the second program blinks, then press ENTER. Repeat steps 2 to 4 to set the second program.
| 23 TH 7:00PM 9:30PM 125 SLP | ||||
ENTER | - | ||||
- | |||||
| |||||
| - | ||||
| - | ||||
| - | ||||
| - | ||||
| - | ||||
| 〈 / /ENTER/CANCEL/MENU〉 | ||||
6 Press both TIMER REC at the same time. The TIMER REC indicator will light. The Timer is programed, when the programed time is reached, the recording is automatically started.
TIMER |
| TIMER REC To cancel timer recording, press both | ||
REC |
|
|
| the buttons again and TIMER REC |
|
|
|
| |
|
|
|
| indicator will go out. |
Notes:
•The VCR section cannot be used while the TIMER REC indicator is lit. If you want to use the VCR operation,
press both TIMER REC buttons at the same time to deactivate the timer.
•When the clock is not set, you cannot select “TIMER REC”. In this case, set the clock (see pages
•After a power failure or disconnection of the power plug, all programmed recording setting and time display will be lost upon resumption of power. In this case, reset the clock (see pages
•If you want to correct the digits while setting, press
the CANCEL button until the item you want to correct, then press 
or 
to correct the desired setting.
•If programming is performed without a tape in the unit, or with a tape without an erase prevention tab, the Timer Recording is not possible. If a tape without an erase prevention tab is in the unit, the tape will be ejected.
Recording (VCR)
43
