TROUBLESHOOTING GUIDE
TELEPHONE
Problem | Solution | |
No dial tone | • | Check installation: |
|
| — Is the base power cord connected to a working outlet? |
|
| — Is the telephone line cord connected to the base unit |
|
| and the wall jack? |
| • Connect another phone to the same jack; the problem | |
|
| might be your wiring or local service. |
| • Is the cordless handset out of range of the base? | |
| • Make sure the battery is properly charged (12 hours). | |
| • Is the battery pack installed correctly? | |
| • | Did the handset beep when you pressed theTALK button? |
|
| Did the CHARGE indicator on the cordless handset charger |
|
| come on?The battery may need to be charged. Did the IN |
|
| USE indicator on the base unit come on? Be sure the AC |
|
| power supply is plugged in. |
| • Charge the handset for at least 20 seconds. | |
|
| |
Dial tone is OK, | • Make sure theTONE/PULSE switch on the base is | |
but can’t dial out |
| correctly set . |
|
| |
Handset/Base does | • Make sure the handset RINGER switch is turned to ON and | |
not ring |
| the base RINGER switch is turned to HI. |
• Move closer to the base.The handset may be out of range.
• You may have too many extension phones on your line.Try unplugging some phones.
• Check for dial tone.
79
