9. Set the RINGER switch on the cordless handset to ON.
10. Plug the power supply cord from the
cordless handset charger into an AC electrical | 9 | |
outlet. | ||
| ||
11. Place the handset in the recharge cradle and |
| |
charge for 12 hours.The CHARGE indicator |
| |
(on the recharge cradle) comes on to indicate |
| |
that the battery is charging. If you don’t | 10 | |
charge the handset battery properly (for |
12 hours) when you first set up the phone, performance of the battery will be compromised.
R
E
| TALK | 11 | |
VIEW | AY STOP | ||
S IP | |||
1 | 2 | 3 | |
4 | 5 | 6 | |
7 | 8 | 9 | |
| ER ASE |
|
*0 #
CHARGE
VERY IMPORTANT: You must complete the corded base unit connections before the cordless handset can be used. Otherwise, it WILL NOT work. See steps
INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference continues, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.
9
