RCA 26958 manual Setting a NEW Security Code from the Base, Indicator, Mute button Hold button

SETTING A NEW SECURITY CODE FROM THE BASE

1.Place the cordless handset close to the base unit.

2.On the base unit, press and hold the MUTE and HOLD buttons simultaneously for at least two seconds.The MUTE and HOLD indicators blink and SET SECURITY is displayed.

3.On the cordless handset, press and hold the 2 and 8 keys simultaneously for at least 2 seconds. SET SECURITY is displayed again.

•If the transmission is successful, the base unit beeps to confirm.

•If the transmission is not successful, the unit will time out after 30 seconds and a 3-beep error tone sounds. If this happens, move the cordless handset closer to the base unit and try again.

DIAL	FORMAT		MESSAGES	ANNOUNCE	DELETE
			PLAY/STOP
MEMO			MESRSAEVIEW		ANSWER
					ON/OFF
HANDSET		REDIAL/
VOLUME		PAUSE		MEMORY	FLASH
PROG
	1		ABC2	DEF 3
	GHI 4		JKL 5	MNO 6
PQRS 7			TUV 8	WXYZ 9
TONE*			OPER 0	#
MUTE					HOLD
PAGE/INTERCOM			SPEAKER

MUTE	HOLD
indicator	indicator
MUTE button	HOLD button

73