RCA 26958 manual Wall Mount Installation

WALL MOUNT INSTALLATION 3

Because it is necessary to charge the cordless handset for 12 hours prior to connecting the phone line for use the first time, it is better to plug the power supply from the cordless handset recharge cradle into an AC electrical outlet. Then place the cordless handset in the recharge cradle and charge for 12 hours prior to installing the base unit.

1.After initial charging of the cordless handset remove the mounting bracket from the base unit; turn it upside down and snap it back on the unit.

2.Set theTONE/PULSE switch toTONE for touch-tone service, or PULSE for rotary service. If you don’t know which type of service you have, check with the phone company.

3.Set the RINGER switch on the base to HI.

4.Plug the coiled cord into the corded handset and the other end into the jack on the side of the base.

Installation continued on next page.

4

1

2

DIAL	DELETE
	PLAY/STOP
	RE VI EW

1 2 3

4 5 6

7 8 9

* 0 #

SPEAKER

CAUTION: Use only the ATLINKS USA 5-2510(black)/5-2511(white) power supply that came with this unit. Using other power supplies may damage the unit.

10