Setting the Clock
Here are some things you should know before you set the clock:
• When you first plug in your VCR, the clock will read
•The buttons for setting the clock are on the remote hand unit,
•While you are setting the clock, the display on the TV screen will prompt you through the procedure.
•If you press a wrong digit, press CLEAR repeatedly until the incorrect digit flashes, and then enter the correct digit.
If you enter an illogical time or date (13th month for example) a question mark will appear instead of the illogical entry. Simply enter the correct digit to replace the question mark.
The clock must be set to the correct time before you can program the timer for unattended recordings or use Express Recording (XPR)
If power is interrupted for an extended period, you will have to reset the clock and
[1]Turn on your "IV and tune it to the VCR Chan- nel (channel 3 or 4). The VCR Channel is
explained on page 11.
Press PROGRAM on the remote hand unit
This "menu" will appear on the "IV.
[2]
The display prompts you to set the time.
[3]
The display prompts you to select AM or PM
I
[4)
The display prompts you to set the date.
push NUM_EA sHowN
I CLCCK $Er
2 _O_L PRC_3RAM
3 DAdLY _OGAAMPress "1" to set the clock
ENO * $H pRCG
...........PRO3 AM nEWEWU
Set the time by pressing two digit buttons on the remote for the current hour and two more for the minute.
(For example, press 0 2 1 5 for 2:15.)
CLOCK SET
TIME 021S
AM°I PM.2
Press "1" for AM or press "2" for PM.
Set the date by pressing six digits in order for the month, day, and year. (For example, press 0 7 0 6 8 6 for July 6, 1986.)
Always press "0" before
r
[5]
The day of the week will appear when you have entered all six digits for the date.
Press PROGRAM to start the clock. (Note that the display on the VCR will show the correct
! | DATE 0_J06tS6 |
| , time | after | you | press PROGRAM. |
I | SUN |
|
|
|
|
|
|
|
|
|
|
| |
|
| J | Press PROGRAM again to return to the pro- | |||
|
| gram | you | were | watching. | |
|
|
| ||||
14
