Safety Precautions

23.WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

24.To reduce the risk of electric shock, the grounding of center pin of plug must be maintained.

25.If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA NO.70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrodes. (See Diagram Figure A.)

 

ANTENNA

 

LEAD IN

 

WIRE

 

GROUND CLAMP

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

 

GROUNDING CONDUCTORS

 

(NEC SECTION 810-21)

 

GROUND CLAMPS

ELECTRIC SERVICE

POWER SERVICE GROUNDING

EQUIPMEN T

ELECTRODE SYSTEM

 

(NEC ART 250, PARTH)

Diagram Figure A

Safety Strap

Caution: Pushing, pulling or climbing on the TV may cause the TV falling. Do not let chlidren climb or hang on the TV. Always place the TV on a sturdy, level, sable surface that can hold the weight of TV. And if possible, secure the TV according to the instruction below (Note: The fastening components such as screws are not supplied with TV).

Step one: Insert the M6 mounting screws into the upper two wall mounting screw holes and fasten them (Figure A).

Step two: Insert anchors to wall and connect the bolts and anchors with ropes or chains (Figure B).

Wall

M6 Screws

Figure A

Figure B

English-7

Page 8
Image 8
RCA 42PA30RQ user manual Safety Strap