RCA 42PA30RQ user manual TV Signal Connection, Antenna, Cable TV service, Set-Top Box

TV Signal Connection

The first step in connecting your TV is obtaining the signal. Your TV 42PA30RQ has a side panel, which allows you to receive analog and/or digital television channels via ANT/CABLE jack.

Before connecting your TV, determine using an antenna or a cable service to obtain the signal.

A. Antenna

Connect the antenna to TV via coaxial cable on ANT/CABLE jack of the side panel. You are ready to receive air local digital and analog channels.

B. Cable TV service

Connect the cable TV wall jack to TV via coaxial cable on ANT/CABLE jack of the side panel. You are ready to receive off-air local digital and analog channels.

C. Set-Top Box

If you use a set-top box, you may need to call your cable company or satellite service provider, which use a special connection, please refer to the user’s guide of set-top box.

Note: Do not plug the AC cord until you have accomplished all the connections.

AC

110V/60Hz

Cable TV Antenna

WALL

OUTLET

Or

ANT/

CABLE

AC Power Cord

(Connect after all the other connections are done.)

English-10