RP5030 EN (B ver) 15/11/06 10:28 AM Page 22

Troubleshooting Tips

Unit doesn’t turn on

Check that batteries are properly

EN inserted and not exhausted.

Make sure battery compartment door is properly closed.

Make sure LOCK function is not activated.

Display keeps flashing when unit is off

You may not have set the time. Refer to section on Time Setting.

Cannot record

Make sure LOCK function is not activated.

Make sure memory is not full.

You have recorded 99 files in one folder. Try record in a new folder.

Cannot show recording date and time during playback

You may have not set the date and time before recording. Refer to section ‘Time Setting’.

No sound from speaker during playback

Make sure volume is not set to 0.

Headphones should not be connected.

Cannot edit

Make sure LOCK function is not activated.

Cannot activate the unit after pressing on keys

There may be software problems. Remove the batteries to reset the unit.

Recordable time becomes shorter

You may have set the recording quality to ‘High Quality’, refer to section ‘Setting Recording Quality’.

Cannot perform playback

Make sure you have selected folder with recorded messages.

Make sure LOCK function is not activated.

Cannot erase recorded file(s)

Make sure you follow each step under section “Erasing Selected File” carefully.

Cannot stop recording when AVR ON

If AVR ON sensitivity is too high (e.g. 8 - 10), recording may not be stopped in noisy environment.

Cannot keep the saved setting

If the batteries are removed, saved settings may be removed.

17

Page 21
Image 21
RCA 5629403B user manual Troubleshooting Tips