Year/Date/12/24/Time Setting

With this function, you can always
read on the display the recording date
and time of your recorded messages.
Follow the steps below for time
setting.
You can still use this unit for normal
recording without setting the time.
However, no correct recording date
and time can be referred for your
recorded messages.
1. Turn on the unit.
2. Press MENUrepeatedly to enter
Time setting mode.
3. When “YEAR” flashes, the digits of
the year blinks (default is 2006).
Press REVERSEor FORWARD to
increase/decrease the number, press
MENUto confirm.
4. Once the year is
entered , the digits
in the month field
will blink (default is
1). Press REVERSEor
FORWARDto
increase/decrease the number, press
MENUto confirm.
5. Once the month is
entered, the digits
in the day will
blink(while the
digits in the month
field stop blinking).
Press REVERSEor
FORWARDto increase/decrease the
number, press MENUto confirm.
6. Once the date is entered, you can
choose between 12/24 hour clock
display by pressing REVERSE
/FORWARD, then press MENUto
confirm.
7. Once the time
format is entered,
the digits in the
hour field will blink
(default setting is 12
(12 hour mode) & 0
(24 hour mode). Press REVERSEor
FORWARDto increase/decrease the
number, press MENUto confirm.
8. Once the hour field
is entered, the digits
in the minute field
will blink. Press
REVERSEor
FORWARDto
increase/decrease the number, press
MENUto confirm.
EN
6
Setting the Time
MM DD
AM
AM
Tip:
Press STOPto exit to Stop mode.

RP5030 EN (B ver) 15/11/06 10:28 AM Page 11