RP5030 EN (B ver) 15/11/06 10:28 AM Page 20
Connecting to the Computer
Install the USB Driver (Windows EN 98SE Only)
For Windows 98SE system, you need to install a USB driver before your computer can recognize your player.
1.Download the driver for your model from the following links: Model RP5030: http://www.rcaaudiovideo.com/en- US/Downloads.html?ProductID=RP5 030
Model RP5035: http://www.rcaaudiovideo.com/en- US/Downloads.html?ProductID=RP5 035
2.Open the downloaded file (RP503x_Win98Drv.exe) and follow the
3.After installation is completed, reboot your computer.
Tip:
•Data transfer is possible even if no batteries are installed in the unit.
•On some operating system, a message warning about "Removing a USB device without stopping it…" might appear, you can press OK to safely ignore it.
Disconnecting from the computer
Unplug the USB cable after you have copied files to or from the unit.
Plugged into the computer
You can transfer files with computer via USB connection.
1.Use the USB cable supplied to connect the unit to the computer.
2.
3.The unit may appear to be a removable drive in your computer.
15
