Step 8: Connect the boom brace
Lay the boom brace on top of the antenna. Make sure the mast clamps (the
English
Fig. 8 |
Locate the screw hole in the refl ector boom and attach the brace with one of the provided #10 screws and nuts. (See fi gure 8.)
Fig. 9 |
Nut |
Screw |
Swing the boom brace down towards the rear. Form a “V” with the metal straps. Use one of the provided #10 screws and nuts to attach the “V” to each side of boom. (See
fi gure 9.)
Step 9: Install the transformer
Find the downlead connection on the bottom of the front section of the antenna, just beyond the refl ector booms.
Place two washers on each of the studs. Place a #10 nut on top of each stud, but don’t tighten them yet.
Place the transformer ends between the two washers and tighten the nuts securely. (See fi gure 10.) Attach the coax downlead to the transformer.
Fig. 10 |
|
| Downlead |
Transformer | connections |
5
