RCA ANT3038XR manual Insert end caps, Mount the antenna to a mast

Step 10: Insert end caps

Fig. 11

Insert two of the plastic end caps in the ends of the antenna as shown in fi gure 11.

Insert a third plastic end cap in the exposed end of the boom brace.

Insert the last two end caps on the ends of the refl ector booms.

Use a rubber mallet to gently tap them into the ends so that they are secure.

Step 11: Mount the antenna to a mast

#10 Nuts

Boom brace

Clamp insert

Main

boom

Clamp

insert

Fig. 12

Fig. 13

Find the two U-bolts, four 1/4” fl ange nuts, and the two mast clamp inserts.

Place the mast clamp inserts on the inside of the mast clamps on the antennas as shown in fi gure

12.Then insert the U-bolts into the mast clamps and mast clamp inserts. Attach the nuts loosely.

Slide the antenna over the mast and lightly tighten the two mast clamps. (See fi gures 12 and 13.) The top side of the antenna is the side with the black plastic pieces on it.

6