Step 2: Connect the reflector booms to the front (small) boom
Fig. 1 |
Fig. 2 |
|
FRONT | Locking Tab |
Find the two refl ector booms and the front (or small) boom. The two smaller elements on the refl ector booms face away from the small main boom.
IMPORTANT: Unfold the elements on each end of the refl ector boom so that the front of their locking tabs face towards each other. The remaining locking tabs can be unfolded in either direction. Make sure that all of the elements are perpendicular to the refl ector boom.
Connect the two refl ector booms to the front boom using two of the provided #10 nuts and screws. The refl ector booms should be parallel to the smaller boom at this point. (See Fig. 1.)
|
|
|
|
Fig. 2A | Main Boom | ||
|
| ||
Step 3: Unfold the rest of the antenna
Unfold all the other elements on the antenna until they lock into place ensuring that they are fl at and parallel to each other. (See Fig. 3.)
Fig. 3 |
2
