RCA B27TF685 Changing the Camera Angle, Using the Zoom Function DVD/VCD, Using the Angle button

16061510-CHAPTER 3 12/13/02 11:47 AM Page 45

DVD O P E R AT I O N

Changing the Camera Angle

When a DVD contains multiple angles of a particular scene, you can select the Angle function.

Using the ANGLE button

Press the ANGLE button to see if an ANGLE ( ) mark is present at the upper right hand corner of the screen.

1

When an ANGLE mark is shown, press the ANGLE button, then an ANGLE select icon will appear at the upper left hand corner of the screen.

2

Press the UP/DOWN arrow buttons to select the desired screen angle,then press the ENTER button.

To turn off the display, press the ANGLE button again.

Using the Zoom Function (DVD/VCD)

1

During playback or pause mode, press the ZOOM button on the remote. A square will be displayed on screen.

2

Press the UP/DOWN or LEFT/RIGHT arrow buttons to select the part of the screen you want to zoom.

Press the ENTER button.

•During DVD playback, press the ENTER button to zoom in 2X/4X/2X in order.

•During VCD playback, press the ENTER button to zoom in 2X.

CHAPTER THREE: DVD OPERATION 45