RCA B27TF685 manual Using Program Review, Right arrow button

16061510-CHAPTER 4 12/13/02 11:48 AM Page 63

VCR O P E R AT I O N

Using Program Review

Program Review allows you to review all of the programmed recordings currently stored in the VCR’s memory and to remove a programmed recording quickly and easily.

1
					VCR Setup
Press the MENU button.		Timer Record			￿
Press the DOWN arrow		Program Review			￿
	CH	True Repeat			:	Off
button to select the VCR
		Block Repeat			:	10
Setup icon, then press the
RIGHT arrow button.
	￿￿Move		￿￿	Sel.	Exit

2

Press the DOWN arrow button to select “Record View”, then press the RIGHT arrow button.

The information for the first program appears on the screen.

			VCR Setup
	Mode	CH	Start	End
	Once	7	10:30 am 12:30 pm
	----	---	-- : --am -- : --am
CH	----	---	-- : --am	-- : --am

------- -- : --am -- : --am

---- --- -- : --am -- : --am

------- -- : --am -- : --am

	SP	10/ 14/ 2002		Mon
Clear : REC Cancel
￿￿Move		￿￿	Sel.	Exit

▼ Program Review is only available if you have programmed your VCR to record at a later time.

3

To see the information for the program number, press the RIGHT arrow button.

4

If you want to remove a program from memory, press the CLEAR button when the program you want to erase is highlighted. That program is erased from memory.

Press the MENU button to exit.

▼ If you’re recording through a cable box, the Program Review screen displays the output channel of the cable box as the channel number to be recorded.

▼ The VCR is equipped with

a program memory backup that saves all the timer program information if the power to the VCR is interrupted. If the unit has been without power, all of the timer program information will be disabled, until you reset the clock. When the clock is reset, the programs will be restored.

CHAPTER FOUR: VCR OPERATION 63