RCA B27TF685 manual Using True Repeat, Press Menu to return to normal viewing

16061510-CHAPTER 4 12/13/02 11:48 AM Page 64

VCR O P E R AT I O N

Using True Repeat

You can set your VCR to automatically repeat a tape or a section of tape. When you use True Repeat, your VCR will play until it reaches the end of a tape. Then, it will rewind to the beginning of the tape and begin playing again.

1

Press the MENU button.

Press the DOWN arrow button to select the VCR Setup icon, then press the RIGHT arrow button.

2

Press the DOWN arrow button to select “True Repeat”, then press the RIGHT arrow button to select “On”.

Press MENU to return to normal viewing.

3

Insert and play a pre-recorded video cassette tape.

The VCR will play the tape until it reaches a the end of the tape. Then, the VCR will stop the tape, rewind it to the beginning, and begin playing again.

4

Press the STOP button to end the repeat.

VCR Setup

	Timer Record			￿
	Program Review			￿
CH	True Repeat			:	Off
	Block Repeat			:	10
￿￿Move		￿￿	Sel.	Exit
				VCR Setup
	Timer Record			￿
	Program Review			￿
CH	True Repeat			:	Off
	Block Repeat			:	10
￿￿Move		￿￿	Sel.	Exit
					▼	If the VCR reaches an unrecorded
					section of tape before it reaches the
					end, it will search forward and check the
					tape again. If it finds a recorded section
					of tape, it will begin playing. If the tape
					is still blank, it will continue to search
					forward, until it reaches the end of the
					tape.

64CHAPTER FOUR: VCR OPERATION