Pioneer DEH-P4400RB Adjusting treble, Using subwoofer output, Adjusting loudness

Section

07Audio Adjustments

Adjusting treble

You can adjust the cut-off frequency and the Treble level.

In FRT1 and FRT2 modes, treble adjustment affects only the front output: rear output cannot be adjusted.

1 Press AUDIO to select TRE.

Press AUDIO until TRE appears in the display.

2Select the desired frequency with 2/3. Press 2 or 3 until the desired frequency appears in the display.

2K—4K—6K—10K (Hz)

Using subwoofer output

This unit is equipped with a subwoofer output which can be switched on or off. When a sub- woofer is connected to the rear output, first, switch the rear output setting to subwoofer, then turn the subwoofer output on. For more details, see Switching the rear output setting on page 37.

1 Press AUDIO to select SUB.W.

When the rear output setting is subwoofer, you can select SUB.W. Press AUDIO until SUB.W appears in the display.

3Press 5 or ∞ to adjust the treble level. Each press of 5 or ∞ increases or decreases the treble level. +6 – –6displayed as the level is increased or decreased.

2Press 5 to turn subwoofer output on. SUB.W :ON appears in the display. Subwoofer output is now on.

3Press ∞ to turn subwoofer output off. SUB.W :OFF appears in the display. Subwoofer output is now off.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the display.

2 Press 5 to turn loudness on.

Loudness level (e.g., LOUD :MID) appears in the display.

3 Press 2 or 3 to select the level.

Press 2 or 3 until the desired level appears in the display.

LOW (low)—MID(mid)—HI(high)

4Press ∞ to turn loudness off. LOUD :OFF appears in the display.

34En