Section

05Built-in CD player

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1 Press FUNCTION to select T-SCAN.

Press FUNCTION until T-SCANappears in the display.

2 Press 5 to turn scan play on.

T-SCAN :ONappears in the display. The first 10 seconds of each track is played.

3When you find the desired track press to turn scan play off.

T-SCAN :OFFappears in the display. The track will continue to play.

• If the display has automatically returned to the playback display, select T-SCANagain by pressing FUNCTION.

Note

After scanning of a CD is finished, normal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1 Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the display.

2 Press 5 to turn pause on.

PAUSE :ON appears in the display. Play of the current track pauses.

3 Press to turn pause off.

PAUSE :OFF appears in the display. Play will resume at the same point that you turned pause on.

Using disc title functions

You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be dis- played.

Entering disc titles

Disc title input lets you input CD titles up to 10 letters long and up to 48 disc titles into the built- in CD player.

1Play a CD that you want to enter the title.

2Press FUNCTION and hold until TITLE IN appears in the display.

20En

Page 20
Image 20
Pioneer DEH-P4400R Scanning tracks of a CD, Pausing CD playback, Using disc title functions, Entering disc titles