Pioneer DEH-P4400RB Other Functions, Using the AUX source, English Selecting AUX as the source

Other Functions

Using the AUX source	4 Move the cursor to the last position by
	pressing 3 after entering the title.
An IP-BUS-RCA Interconnector such as the	When you press 3 one more time, the entered
CD-RB20 or CD-RB10 (sold separately) lets you	title is stored in memory.
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the	5 Press BAND/ESC to return to the playback
IP-BUS-RCA Interconnector owner‘s manual.	display.

Section

09

English

Selecting AUX as the source

Press SOURCE to select AUX as the source.

Press SOURCE until AUX appears in the display.

•If the auxiliary setting is not switched on, AUX cannot be selected. For more details, see Switching the auxiliary setting on page 37.

Setting the AUX title

The title displayed for the AUX source can be changed.

1After you have selected AUX as the source, press FUNCTION and hold until TITLE IN appears in the display.

2Press 5 or ∞ to select a letter of the alpha- bet.

Each press of 5 will display a letter of the alpha- bet in A B C ... X Y Z, numbers and symbols in 1 2

3... @ # < order. Each press of ∞ will display a letter in the reverse order, such as Z Y X ... C B A order.

3Press 3 to move the cursor to the next character position.

When the letter you want is displayed, press 3 to move the cursor to the next position and then select the next letter. Press 2 to move back- wards in the display.

Español

Deutsch Français Italiano

Nederlands

En 39