RCA CC432 manual Playback on a TV Without Audio and Video Inputs

Playback on a TV Without Audio and Video Inputs

To connect your camcorder to a TV without audio and video input jacks. You will need an optional RF output adapter (such as CRF95) and an optional coaxial RF cable (such as VH82 or VH85) shown on page 48.

Antenna

OR

Antenna

Back of TV

1A

1B

OR

Optional 300/75 ohm

Transformer3 (such as 193983)

VHF

OR

Channel Selector

VHF

	IN
	FROM
Optional 75-300 Ohm	ANT
Transformer

Optional RF Output Adapter

(such as CRF95)

Optional Coaxial RF Cable	OUT
(such as VH82 or VH85)	TO TV

1Disconnect the VHF antenna from your TV. If you are going to leave the RF adapter connected to the TV, connect the antenna to the RF output adapter.

A.If antenna is round 75-ohm cable, connect it to IN FROM ANT connector on RF output adapter.

B.If antenna is flat twin-lead, connect flat-lead connectors to screw terminals on optional 300- 75 ohm transformer. Then connect transformer to IN FROM ANT connector on RF output adapter.

2Attach one end of coaxial RF cable to OUT TO TV connector on RF adapter, and attach other end of the cable to VHF input on TV as shown.

Note: If TV has screw terminals, you may need an optional 75-to-300 ohm transformer, such as AH011.

3Attach RF output adapter’s yellow plug to the VIDEO jack, small plug to the RF DC OUT jack, and white plug to the AUDIO jack on the side of the camcorder.

40