RCA CC437 Using the Optional Thomson Car Cord Adapter, Cigarette Lighter Socket Optional Car Cord

Models: CC437

1 72
Download 72 pages 17.58 Kb
Page 17
Image 17
Using the Optional Thomson Car Cord Adapter

Using the Optional Thomson Car Cord Adapter

To power your camcorder from the cigarette lighter socket of a car, truck, or RV, you need the optional car cord adapter DCC096 shown on page 55.

The DCC096 car cord is especially designed to convert power from a 12-volt battery to the 9.6-volt input jack on the camcorder.

Caution: The DCC096 car cord is designed to be used only with vehicles having 12-volt negative ground electrical systems.

Warning: To avoid possible damage to your camcorder, use only the DCC096. It has positive tip polarity and is capable of converting 12-volts to 9.6 volts.

Cigarette Lighter Socket

Optional Car Cord

Adapter (DCC096)

DC IN 9.6V Jack

1.Remove the adapter/charger’s DC cable or battery from the camcorder, if either is attached.

2.Connect the small plug on the car cord to the DC IN 9.6V jack located on the back of the camcorder.

3.Insert the other end of the car cord into the vehicle’s cigarette lighter socket.

4.Place the camcorder’s CAMERA/OFF/VCR switch in CAMERA. If the car cord is connected properly, the electronic viewfinder will come on.

Notes: The vehicle does not have to be turned on for the camcorder to operate from the DC car cord.

When using the car cord to power the camcorder, the battery level indicator may

display Cigarette Lighter Socket . This indicator is used for battery operation and has no meaning when using the car cord to power the camcorder.

15

Page 17
Image 17
RCA CC437 manual Using the Optional Thomson Car Cord Adapter, Cigarette Lighter Socket Optional Car Cord, Adapter DCC096