Enjoying music in the remote zone
ON/STDBY
SLEEP
Zone 2 indicator | Zone 2 Off |
Standby/On |
|
| Display | Dimmer |
|
|
|
|
|
| Rec Out | Zone 2 | Off | |
|
|
|
|
|
|
|
|
|
|
|
| Master Volume | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Setup |
|
|
|
|
|
|
|
|
|
|
| Tuning |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Enter |
Standby |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Power |
|
|
|
|
|
|
|
|
|
|
|
| Return | |
|
|
|
|
|
|
|
|
|
|
| Preset |
|
|
|
On | Off |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Direct | Stereo | Surround | THX | DSP |
| FM Mode | Memory |
|
|
|
Upsampling |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| Clear |
|
|
|
Phones | Zone 2 (GRN ) |
|
|
|
|
|
|
|
|
|
|
| Video 5/Video Cam Input | |
| Audio | Rec ( RED ) | DVD | Video 1 | Video 2 | Video 3 | Video 4 | Video 5 | Tape | FM | AM | Phono | CD | |
| Selector |
|
|
|
|
|
|
|
|
|
|
|
|
|
VCR 1 | VCR 2 | Digital | S Video | Video | L Audio R |
Input source buttons
INPUT SELECTOR 
buttons
ZONE 2
HOME THEATER CONTROLLER
Playing music using the buttons on the DTR-7.2
1.Press the Zone 2 button on the
2.Select a source.
After pressing the Zone 2 button, you must press an input source button within 5 seconds. The Zone 2 indicator lights.
Ex.: When the CD button is pressed.
To select the same source for the remote zone that is selected for the main zone, press the Zone 2 button again until “Zone2Sel:SOURCE” appears in the display.
When “Zone2Sel:Off” is displayed, the output to the remote zone is turned off.
Notes:
•If a sleep time is set with the SLEEP button, it will also work for the remote zone.
•If the source for the main zone is selected as the source for the remote zone and the source for the main zone is changed, then the source for the remote zone will change as well.
•The Zone 2 terminal is an analog output. Digital signals are not output. If no sound is heard from the selected input source, check if the component is connected to the analog inputs.
•If the Rec Out button is pressed in the main room while someone is using the system in the remote zone, the Zone 2 function will be deactivated and the source will turn off in the remote zone.
•If you select FM (or AM) with the input source buttons when the source for the remote zone (Zone 2) is set to AM (or FM), the output for the remote zone also changes to AM (or FM).
•When you are using the remote zone (Zone 2), 
system operation will not work.
•When you are not using the remote zone (Zone 2), press the Zone 2 button and then press the Off button to turn off the Zone 2 indicator.
Selecting an input source using the remote controller
Turning on the Zone 2 and putting it in the standby state when the
After pressing the ZONE 2 button, press the ON/STDBY button within 5 seconds.
Selecting an input source:
After pressing the ZONE 2 button, press an input source button within 5 seconds.
If tuner is selected with the TUN button, the CH 
button becomes enabled.
Notes:
•Adjust the volume for the remote zone at the
•After you press the ZONE 2 button on the remote controller, the Standby indicator on the
54
