Rear panel facilities
IR IN/OUT
If the
Using a
RS 232
The RS 232 port is to be used in conjunction with an external controller to control the operation of the
VIDEO IN/OUT
These are the video inputs and outputs. On the rear panel, there are five video inputs and two video outputs and each one includes both composite video and S video configurations. Connect VCRs, LD players, DVD players, and other video components to the video inputs.
The two video output channels can be used to be connected to video tape recorders for making recordings.
•When connecting a VCR or other video component, make sure you connect the audio and video leads together (i.e., both to VIDEO 3).
•The Video 5 inputs are located on the front panel.
Composite video jack
S video jack
MULTI CHANNEL INPUT
By connecting a DVD player, MPEG decoder, or other component that has a multi channel port, you can playback the audio with 5.1- channel or
L (white)
Front output
R (red) | DIGITAL | PRE OUT | |
OUTPUT | R | L | |
|
| FRONT |
|
Subwoofer | OPT |
|
|
|
|
| |
|
| SUB | CENTER |
|
|
| |
| DIGITAL |
|
|
| INPUT |
|
|
GND
Use this GND terminal for connecting the ground (or earth) wire if a turntable is connected. Refer to “Connecting a turntable” on page 16.
L (white)
Surround
R (red)
Ex: DVD-Audio player/
MPEG decoder
R (red) |
Surround back |
L (white) |
Center |
COAX | SURR |
1 |
|
| SURR |
| BACK |
2 |
|
3 | FRONT |
| |
OPT | SUB |
1 |
|
SURR
2
SURR
BACK
3
R
DIGITAL
INPUT
GND
MULTI C INPUT
CENTER
L
15
