RCA CC6263 manual cassette. See pages, INT. TIME for, AUTO to display the menu. See pages, Trouble

Trouble Checks

Trouble	Checks and Adjustments
Date and/or time are	• Displays are recorded on tape whenever they appear
recorded on tape		in the viewfinder. Remove them from viewfinder
		when recording. See pages 20-21.
	• When AUTO DATE is selected (POWER switch in
		CAMERA AUTO), date display is automatically
		recorded when you begin recording or change the
		cassette. See pages 20-21.
Date and/or time are	• Clock lithium cell battery might need replacing.
incorrect		See page 17.
	• Date or time might need to be set. See pages 18-19.
Cannot set REC or	• Make sure there is a tape in the camcorder.
INT. TIME for	•	Check tape speed setting. Tape speed must be set
animation or time-		to SP for time-lapse or animation recording.
lapse recording	• Make sure POWER switch is not set to CAMERA
		AUTO to display the menu. See pages 50-53.
Cannot record at	• Record for at least five seconds at beginning of tape
beginning of tape		to start tape running smoothly.
using animation or	• Use fade-in feature before starting to record at
time-lapse recording		beginning of tape.
Vertical white lines	• This might occur when the background extremely
appear when shoot-		contrasts with the subject.
ing bright object
Error number (E01,	•	Try disconnecting power source. Wait ten seconds
E02, etc.) appears in		and then connect power source again. If error
viewfinder		number does not disappear from viewfinder, consult
		your Authorized RCA Camcorder Service Center.
Streaks in picture	•	Adjust tracking with P.AE and FADES buttons. See
during playback or		page 57.
play-pause
Bright, crystal-	• Sunlight is directly entering the lens.
shaped spots in
viewfinder

70