Playback
Use the LCD Monitor or Viewfinder for Playback (Continued)
To Play Back a Tape
1. Attach a power supply.
Attach the adapter/charger, charged battery, or optional car cord.
2.Insert a tape.
•Open the LCD monitor. Open the monitor at least 60˚ before opening the cassette compartment.
•Slide EJECT switch to the left to open the cassette compartment.
•Turn the tape wheel on the cassette to remove any slack from the tape.
•Insert the cassette with the tape wheel facing up and the tape window facing out.
•Press on the button of the cassette compartment door to lock the cassette compartment shut.
Use the Viewfinder
•Make sure the monitor is closed and locked. The viewfinder turns on.
•Adjust the viewfinder for a comfortable viewing position.
•Turn the eyepiece focus control to adjust the focus of the viewfinder for your vision.
5.Press the PLAY/PAUSE button to begin playback.
•The 
indicator appears in the viewfinder or on the LCD monitor during playback.
•Turn on TBC (Time Base Correc- tor) if picture needs stabilizing. TBC indicator appears in viewfinder or on LCD monitor.
•If necessary, adjust tracking.
3. Set the POWER switch to VCR.
The power indicator lights.
4.Use the LCD monitor or viewfinder to see what you are playing back.
Use the LCD Monitor
•Make sure the monitor is open 60˚. The viewfinder turns off.
•Rotate the monitor to a comfortable viewing position (180˚up and around or 90˚ down).
•Adjust the brightness of the image by turning the Bright control (also menu PUSH dial).
•Adjust the speaker volume with the VOL (volume) control (also zoom lever).
•During playback, use the playback features on the following pages.
6.Press the STOP button when you are finished.
57
