RCA CC6392 manual Time Counter, Tracking, To Use the Memory-Stop Feature

Playback

Playback Features (continued)

Time Counter

The time-counter display shows the actual time elapsed when playing back a segment of tape. The memory-stop feature helps locate a certain point on the tape. Turn memory stop on to stop the tape automatically during rewind or fast forward when the time counter reaches M 0:00:00.

To Use the Memory-Stop Feature

1.Locate the place on the tape you want to return to, set the POWER switch to VCR, and press COUNTER R/M for more than two seconds to reset the counter to 0:00:00.

2.Press COUNTER R/M for less than one second to turn the time counter’s memory-stop feature on or off. When memory stop is on, an M appears before the time counter.

M 0:00:00

Time Counter With Memory

Stop Turned On

3.Continue to play the tape. When you want to return to the place you marked, press the STOP button.

4.Press REW 55. The tape rewinds to the time counter reading of

M 0:00:00.

Tracking

During playback, streaks may appear in the playback picture. Press both tracking buttons (P.AE and FADES buttons) to activate manual tracking mode. Press either button again until the streaks disappear. MT appears during manual tracking.

MT

Manual Tracking Indication

in Viewfinder or on LCD Monitor

Press both tracking buttons again to turn automatic tracking back on. AT flashes in the viewfinder for a fiew seconds and then disappears.

AT

Auto Tracking Indication

in Viewfinder or on LCD Monitor

Note: The tracking buttons may have no effect on tapes recorded on other camcorders or VCRs.

61