RCA CC6392 manual Playback Operation and How to Copy Tapes on the VCR

Playback

Playback on TV (or VCR) with Audio/Video Inputs (continued)

Playback Operation and How to Copy Tapes on the VCR

1.A. Camcorder connected directly to TV: Turn on the TV and tune it to the video input channel.

B.Camcorder connected to VCR that is already connected to TV: Turn on VCR and place it in the “line” or “camera mode”. (If your VCR does not have a “line” or “camera mode”, consult the VCR owner’s manual.) Operate the TV as you normally do to see the signal coming from the VCR.

2.Set the POWER switch to VCR to turn on the camcorder. The power indicator lights.

3.Press PLAY/PAUSE.

•During playback, use the playback features on pages 60-61.

4.To copy what the camcorder is playing, place a blank cassette in the VCR, and press the VCR’s RECORD button.

Note: Make sure the memory-stop feature is turned off (press COUNTER R/M) or the camcorder enters play-pause when the counter reaches M 0:00:00.

5.Press STOP when you are finished.

Caution: The unauthorized recording of copyrighted material may infringe the rights of others.

Viewing What the Camcorder is Seeing (or Recording)

1.A. Camcorder connected directly to TV: Turn on the TV, and tune it to the video input channel.

B.Camcorder connected to VCR that is already connected to TV: Turn on VCR and place it in the “line” or “camera mode”. (If your VCR does not have a “line” or “camera mode”, consult the VCR owner’s manual.) Operate the TV as you normally do to see the signal coming from the VCR.

2.Set the POWER switch to CAMERA.

Note: Turn the TV’s volume down to prevent a high-pitched squeal caused by feedback.

3.Press the thumb trigger to begin recording. You can watch what the camcorder is seeing (or recording) on the TV screen.

65