Using Your TV and Remote
With a Satellite Receiver: Basic Operation
You may also be able to use the TV’s remote with RCA and DSS™ satellite receivers. Refer to your Satellite Receiver owner’s manual to hook up your Satellite Receiver. The remote may need to be programmed for other brands of satellite receivers, but may not operate all models of the brands listed below. Use the codes below or on the sheet packed in with your remote.
Follow the instructions below for basic operation of your receiver. You may also want to experiment with other buttons on the remote to see if they work with your receiver.
Program the remote for your Satellite Receiver
Turn on the Satellite
Receiver
Turn off the Satellite
Receiver
Satellite Receiver Codes
| R | VCR1 | DSS | C |
|
| ||
|
|
|
| ¥ | ABL | E |
| |
WE |
|
|
|
| TV | |||
PO |
|
|
|
|
|
|
| |
|
|
| ¥ |
|
| O |
|
|
|
| VCR2 | LD | AUDI |
|
| ||
|
|
|
|
|
| |||
REW PLAY FF
REC | STOP | PAUSE |
DISPLAY | CHAN | SKIP |
|
|
L | V | |
O | O | |
V | ||
L | ||
|
MUTE | CHAN | PREV CH |
|
1 
2 
3 
4 
5 
6 
7 
8 
9 
INPUT | 0 |
| ANTENNA |
|
|
| |
CLEAR | MENU | • | RESET |
| PROG |
| |
|
|
|
A.Point the remote at the satellite receiver and hold DSS•CABLE.
B.Enter the code for your brand from the code list below.
C.Release DSS•CABLE.
D.Press POWER. If nothing happens, try pressing
DSS•CABLE and then POWER.
A.Press DSS•CABLE to set the remote to control the satellite receiver.
B.Press POWER to turn on the receiver if it did not turn on when you pressed
DSS•CABLE.
A.Press DSS•CABLE to set the remote to control the satellite receiver.
B.Press POWER to turn off the receiver.
Chaparral | 80,81 |
Cheyenne | 81 |
Drake | 82,83 |
DSS | 00 |
GE | 00 |
General Instruments... | 92,93,94 |
ProScan | 00 |
RCA | 00 |
Realistic | 84 |
Sierra I,II,III | 81 |
STS1 | 85 |
STS2 | 86 |
STS3 | 87 |
STS4 | 88 |
Toshiba | 89 |
Uniden | 90 |
Video Cipher II | 91 |
MOVE
u n i v e r s a l
DSS is a trademark of DIRECT TV, Inc., a unit of GM Hughes Electronics.
11
