■Error Display Message (CD Changer)
Display | Possible Cause | Problem | Probable Solution |
– E1 – | Disc dirty or wrong side | Next disc is |
|
up | Eject magazine and check the | ||
|
| automatically | |
– E2 – | Disc damaged | selected. | disc. |
|
| ||
|
|
|
|
|
|
| Press EJECT button on changer. |
|
|
| If trouble persists, press the |
– E3 – | Receiver fails to | – | reset button on changer. |
operate | Trouble still persists, ask your | ||
|
|
| dealer or nearest service center |
|
|
| for repair. |
|
|
|
|
NO DISC | No disc at all in maga- | – | Insert discs into magazine. |
zine | |||
NO MAGAZINE | No magazine in the | – | Load the changer with the maga- |
changer | zine. |
Note: Display contents and operations vary in part from one changer to another (due to the differences in changer specifications). For details, refer to the manual of the changer you are using.
E
N
G
L
I
S
H
60
Troubleshooting Tips
■ Power
Problem | Possible Cause | Probable Solution |
| Dead vehicle battery | Charge vehicle battery. |
| Ignition not on | Turn ignition to On or Acc. |
|
|
|
| Connections not made cor- | Check connections. |
| rectly | |
|
| |
|
|
|
| Bad power battery line | Connect battery cables to terminals that are |
| connection | always live. |
|
|
|
| Bad accessory line | Connect accessory power cord with ACC power |
Unit won’t turn on. | connection | supply of the car. |
|
| |
| Bad ground lead connection | Connect ground lead to a metallic part of your |
| car. | |
|
|
|
| A connecting cord between | Check the connecting cord between the display |
| the display unit and the con- | |
| trol unit is not connected | unit and the control unit. |
| correctly. |
|
|
|
|
| Fuse burned out | Replace it with one of the specified rating. |
|
|
|
63
