Panasonic CQ-VA707N operating instructions Specifications

Specifications

General

Power Supply	: 12 V DC (11 V - 16 V), test voltage 14.4 V negative ground
Current Consumption	: 7 A (at rated VTR operation output)
Audio Input Sensitivity	:	0.5 Vrms (VTR)
Pre-output Voltage	: 4 V (CD Changer Play Mode; 1 kHz 0 dB)
Video input signal	: Composite video signal, 1.0 Vp-p (75 Ω)
Video output signal	:	Composite video signal, 1.0 Vp-p (75 Ω)
Dimensions
Display Unit	: 178 (W) x 50 (H) x 160 (D) mm
Control Unit	:	215 (W) x 41 (H) x 150 (D) mm
Weight
Display Unit	:	1.9 kg
Control Unit	:	1.2 kg
Display Unit
Liquid Crystal Panel	:	7 inches wide
Screen Dimensions	: 156 (W) x 87 (H) x 178 (D) mm
Number of Pixels	: 336,960 pixels (234 vertical x 480 horizontal x 3)
Valid Pixel Ratio	:	over 99.99 %
Display Method	: Transparent color filter format
Drive Method	: TFT (Thin Film Transistor) active matrix format
Light Source	: Internal light (built-in small fluorescent lamp)
Speaker	: 36 mm round speaker (one)
Sound Output	:	0.7 W
Control Unit
FM Stereo Radio
Frequency Range	: 87.5 – 108 MHz
Usable Sensitivity	: 8 dB/µV (S/N 30 dB)
Stereo Separation	:	35 dB (at 1 kHz)
MW Radio
Frequency Range	:	531 - 1,602 kHz
Usable Sensitivity	:	28 dB/µV (S/N 20 dB)
LW Radio
Frequency Range	:	153 - 279 kHz
Usable Sensitivity	:	35 dB/µV (S/N 20 dB)

E

N

G

L

I

S

H

64

Note: Specifications and design are subject to modification without notice due to improvements in tech- nology.

67

CQ-VA707N