Connection example
See pages 55 to 61 about electrical connections for detail.
Panasonic Car Navigation System (CN-DV2000EN)
Connect to RGB connector.
When using DVD Player of
NAVI | RGB | VTR1 | VTR2 |
CAMERA | OFF | VTR1 | VTR2 |
TV TUNER | OFF | VTR1 | VTR2 |
VTR1 | PAL | NTSC | PAL for DVD signal |
VTR2 | PAL | NTSC |
|
Note on connecting a car navigation system
•RGB connection
It is recommended that Panasonic car navigation system be connected to the RGB terminal. If a car navigation system is connected to another than the RGB terminal (VTR1 or VTR2), set the navigation screen to NTSC. To watch a DVD video of the PAL system with the car navigation system, change the setting to PAL on this menu.
•RCA cord
It is recommended that the VTR output (RCA cord) of a car navigation system be connected to VTR1. If a DVD video disc is inserted in this case, the VTR1 DVD video mode is automati- cally selected (provided that the video control cord is connect- ed) (B page 57).
Other corporations’ car navigation sys- tem
| E |
| N |
| G |
| L |
| I |
| S |
DVD output | H |
RGB: car navigation | |
| 20 |
| |
VTR1 |
|
RGB | |
|
Other corporations’ car navigation system
Connect to VTR1 or VTR2.
VTR1
NAVI | RGB | VTR1 | VTR2 |
|
CAMERA | OFF | VTR1 | VTR2 |
|
TV TUNER | OFF | VTR1 | VTR2 |
|
VTR1 | PAL | NTSC |
|
|
|
| |||
VTR2 | PAL | NTSC |
|
|
|
|
|
|
|
Set the connector that is con- nected to a car navigation.
Use the same signal as the car navigation. (ordinary NTSC)
VTR1
VTR2
23
