Installation (Continued)
E
N
G
L a) Push the right and left clamp plates outwards,
I one at a time, and pull the display unit toward
Syourself.
H
b) After removing the right and left clamp plates,
51 pull the unit with both hands till it comes off.
Push here to remove the clamp plates.
<Mounting the Control Unit>
Mounting Example
Stick Velcro tape o on the carpet and mount the control unit on it.
Connect car radio antenna cord to the control unit using radio antenna exten- sion cord !9between them.
Note: Some carpet materials may not be suitable for this mounting method. In this case, please contact your nearest Panasonic Service center for service.
Car Radio 
Antenna Cord
oVelcro Tape
!9Radio Antenna
Extension Cord
Control Unit
Carpet
Rado Antenna Connector
Notes:
¡Never mount the control unit in any of the following locations to avoid damage due to overheating:
1.Near the heater port.
2.Places like the dashboard or rear deck, where it may be exposed to direct sunlight. ¡Do not mount the control unit near the door, where it could be exposed to rain.
54
