InstalhgReplacing Batter& ‘T:- Operating Your Remote
Before attempting to operate your remote control, install the batteries as shown below.
1.Turn the remote control face down and press on the ribbed area of the battery cover to slide it off.
2.Install four new alkaline “AAA” batteries in the battery compartment as shown. Match the + end of each battery to the + marks in the battery compartment.
3. Replace the cover.
•Replace the batteries when your components fail to respond to the remote control. You may have to reprogram the code numbers when you change batteries. Do not press any buttons while changing batteries.
•The remote control produces an invisible (infrared) beam that travels in a straight line like the beam of a flashlight. For this reason, when operating the remote control, you must point it directly at the remote sensor on the component you want to control. Objects between the remote and the sensor can block the infrared light beam.
•Never place anything heavy on top of the remote control or lay it upside- down. This may accidentally depress the buttons for a long time and discharge the batteries.
•Your remote control is designed to be very rugged and will withstand a considerable drop. If it receives an extreme blow, the case is designed to slightly separate at the seam rather than fracture. If this happens, simply squeeze the case where it separated until it snaps back together. The operation of the remote will probably not be affected.
3
. ..
