![](/images/new-backgrounds/1277751/27775137x1.webp)
Connections & Setup
VCR1 ONOFF TV
TV button
DVD VCR2 AUX SAT•CABLE
MUTESKIP
| CH + |
L | V |
O | O |
V | |
| L |
| CH - |
FETCH | GO BACK |
GUIDEINFO
OK
Arrows
MENUCLEAR
Plug in the TV
Plug the flat end of the cable into the POWER jack on the back of the TV. Then plug the end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely.
Put batteries in the remote
•Remove the battery compartment cover from the back of the remote by pushing down on and sliding off the cover.
•Insert 2 “AA” fresh batteries. Make sure the polarities (+ and
•Replace the cover.
How to Use the Remote Control to Complete the Interactive Setup
The technical term is “Navigation” – how you move through the on- screen menus. The theory is the same throughout the menu screens: highlight your choice and select it.
To highlight a menu item, press the arrow buttons on the remote to highlight one of the items listed on the screen. Use the up or down arrow button to move up or down. Use the right or left arrow button to move right or left.
To select the item that you’ve highlighted, press OK.
Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color).
Turn on the TV
Press TV on the remote, or press POWER on the TV’s front panel.
Note: Pressing the TV button not only turns on the TV, but puts the remote into TV mode. “TV mode” means that the buttons on the remote control operate the TV’s functions.
Chapter 1 | 17 |