Chapter 1: Setup and Connections

Connection: DVD + TV + Audio Receiver

Both Dolby Digital® and DTS® are audio formats used to record 5.1-channel audio signals onto the digital track of film (while the film is being made). Both of these formats provide up to six separate channels: left, right, center, left rear, right rear, and common subwoofer. The disc will play 5.1-channel sound only if you’ve connected a DTS or Dolby Digital receiver or decoder and if the disc is encoded in the Dolby Digital or DTS format.

CABLE

OR

OFF-AIR SIGNAL

Back of TV (example)

VIDEO

AUDIO

S-VIDEO

CABLE/ANTENNA

L

R

 

Please Read This Before Using the DIGITAL AUDIO OUT Jack!

This player’s digital output jack is designed for a connection to a Dolby Digital or DTS receiver or decoder. Older digital equipment may not be compatible with the Dolby Digital bitstream. Such a

AUDIO

OUT

R

OUT S-VIDEO

L

Y

Pb

Pr

VIDEO OUT

DIGITAL AUDIO OUT

OPTICALCOAXIAL

connection can create a high level of noise that may be harmful to your ears, and could damage headphones or speakers. It is important to choose the correct Digital Output setting in the DVD Player’s Sound menu, especially when you use either of the DIGITAL AUDIO OUT jack. For more information, go to page X.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.

DTS is a registered trademark of Digital Home Theater Systems, Inc.

Back of DVD Player

 

 

Consult the

 

 

manual that

 

 

came with

OPTICAL

COAXIAL

your receiver

to connect it

 

 

 

 

completely.

Back of Receiver (example)

6

Page 8
Image 8
RCA DRC220N manual Setup and Connections