RCA DRC600N user manual Basic functions, Loading a disc, Playing a disc

Basic functions

Loading a disc

Loading a “single-sided” disc.

1.Press the open O key to open the disc compartment.

2.Insert a disc and locate it on the rotary spindle by applying pressure around the edge of the disc’s center hole. The printed side of the disc should face upwards (Audio CD, Video CD, single-sided DVD (1), etc.).

3.Push the flap down until it clicks.

1. Double-sided discs have a small label on both sides near the center. With most DVDs, a disc-specific menu appears. In that case, follow the instructions.

Playing a disc

Playback begins as soon as the flap is fully closed.

•With a DVD, the disc menu appears. Press B (playback) to start playback or select another option (4), in the disc menu using the Navigation keys. To validate your selection, press B (playback).

•With an audio CD or video CD, use the B (playback) key to start it playing.

To go to a chosen track on a CD, or to a title or chapter on a DVD, press the osd key which brings up a banner on the screen (❖ page 11).

To stop playback momentarily (2) press stop L once. Press twice to stop it completely (3).

2. The player has memorized the last scene on the disc. If you now press B: playback starts from this point. To erase “Resume memory”, press

stop L.

Resume memory does not work with interactive discs (without elapsed play time information).

3. If the player is left in STOP mode for more than 2 minutes without any user interaction, a screen saver will be activated (fade in / fade out). After about 30 minutes have elapsed in STOP mode without user interaction, the player will be automatically switched off.

4. Depending on the DVDs, it may be possible to change the language during playback (❖ page 22).

Graphics contained within this publication are for representation only. Your unit might differ.

14