References
___ The correct lamp replacement unit. To order the correct lamp, you’ll need to know your TV’s model number, serial number, and lamp type. The TV’s model number is located under the front panel piece towards the bottom left corner. Go to page 10 for information on removing the front panel piece. The serial and lamp part numbers are listed on the Service Model Number sticker (example shown on the right). The sticker is located on the lamp handle (see the following page for sticker location).
___ The box that the lamp replacement unit came in.
CAUTION ! – HOT
PRECAUCIÓN – CALIENTE
ATTENTION – CHAUDE
LAMP PART # - 265109
41030325110090 | BAR CODE AREA |
EXAMPLE: Service Model Number sticker with lamp part number listed.
1.Read the precautions listed above.
2.Make sure your hands are dry and clean before you begin replacing the lamp.
3.Unplug the TV’s power cord from the wall outlet (or power strip). Unplug the power cord from the back of the TV.
4.Put the power cord far away from the TV. Taking this precaution will ensure that no one plugs in the TV if you walk away from it, or when you’re waiting for the lamp unit to cool, or when you’re installing the new lamp.
5.Wait 1 hour so the lamp can thoroughly cool. If you don’t wait at least 1 hour, you risk getting injured!
6. After 1 hour, go to the front of the TV set and remove the front panel piece. Go to page 10 for instructions. Find the
Note: Do not attempt to repair the lamp. Do not open the lamp assembly unit — leave the lamp in its casing.
7.Loosen the screw on the door (don’t remove the screw, just loosen it).
Note: Don’t use a coin to loosen the screw because the coin could fall into the TV.
Chapter 5 | 77 |
