RCA E13344 manual Point and Select, Chan /v Buttons Channel Up and Down

GETTING STARTED

POWERMENU

	HA	N
	C
DISPLAY		CLEAR
L		V
		O
O
		L
V
MUTE		PREV
		CH
	CHAN
1	2	3

4		5	6
7		8	9
ESE		0
R	T

Point and Select

CHAN ^/v Buttons (Channel Up and Down)

Press to select the next higher or lower channel in memory. You can add or erase channels in memory as desired. Details are on page 7. When a menu is displayed, CHAN ^/v allows you to select and adjust menu controls.

VOL Buttons (Volume Up and Down) (Also – and

+Buttons) Press VOL > to increase volume, or press VOL < to decrease volume. The volume display appears on the screen when you press the VOL buttons. When a menu is displayed, press > or < to adjust the setting of an item that is highlighted in a menu.

Number Buttons (0-9)Press to access any channel number. To select a channel, press two number buttons. For example, press 0 then 6 for channel 6. To select a 3-digit number, press and hold number button 1 until 1– – appears on the screen. Then press the other two numbers.

RESET Button Press to return all video settings (color, tint, contrast, brightness, and sharpness) back to the original settings.

Note: Your TV is equipped with an audio/video input. To tune to the audio/video input press “0” then “0” (zero button twice) on the remote. The audio/video input can also be added to the channel scan list and accessed by the channel buttons.

To use the on-screen menus, you need to know one rule: point and select:

•Point to your selection with the on-screen highlight. (Use the VOL < / > buttons on your remote to move left and right; use the CHAN ^/v buttons to move up and down.)

•Press the MENU button to select the highlighted item.

7