RCA F19422 manual Connection TV + VCR + Satellite Receiver

Connections & Setup

Connection: TV + VCR + Satellite Receiver

1.Connect coaxial cables to the Satellite Receiver

A.Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your satellite receiver (sometimes labeled IN FROM ANT).

B.Connect the coaxial cable from your satellite dish antenna to the Input Jack on your satellite receiver (sometimes labeled SATELLITE IN).

2.Connect the Satellite Receiver to the VCR and to the TV

A.Connect a coaxial cable to the Output Jack (sometimes labeled OUT TO TV) on the satellite receiver and to the Input Jack on the VCR (sometimes labeled IN FROM ANT).

B.Connect a coaxial cable to the Output Jack on the VCR (sometimes labeled OUT TO TV) and to the CABLE/ANTENNA jack on the TV.

3.Connect G-LINK cable

A.If you haven’t done so, remove the Demo Pin from the G-LINK jack.

B.Connect the G-LINK cable to the G-LINK jack on the TV. Next step, place the wands of the G-LINK cable to work with your VCR (instructions are on p. 13).

Go to page 13

Chapter 1 11