SETUP AND CONNECTIONS
THE BASIC CONNECTION
The basic connection below (TV and VCR) is the most common connection and is therefore used to illustrate a single component connection with your TV. For better sound and picture quality and multiple component connection information refer to the next section, Advanced Connections.
Cables
You will use the following type of cable to make your connection:
Coaxial Cables: In this connection, two Coaxial
Cables are used: one connects from an antenna, cable, or cable box to the VCR, and one connects from the VCR to the TV. These cables carry both audio and video signals.
How to View the VCR
To watch the VCR in this connection tune TV to Channel 3 or 4.
Later, in the Interactive Setup section you will program the TV to automatically tune to Channel 3 or 4 when you turn on the VCR.
CABLE, CABLE BOX, OR ANTENNA
VCR 1
OUT | IN FROM ANT CH3 |
CH4 | |
| OUT TO TV |
VIDEO AUDIO |
|
TV
VIDEO |
| AUDIO | |
R | L | ||
| |||
|
| IN | |
| R | L | |
|
| OUT |
CABLE/
ANTENNA | |
| |
|
Once you have completed this connection you may skip to Step 3.
Please note that the
5
