Using the TV’s Features
Picture from TV
Picture from VCR
VCR1 | ON OFF | TV |
DVD | VCR2 AUX | SAT CABLE |
MUTE | CH + | SKIP |
|
| |
L |
| V |
O |
| |
V |
| O |
|
| L |
| CH - |
|
SOUND |
| GO BACK |
GUIDE |
| INFO |
OK
Arrow buttons
| MENU |
| CLEAR |
| 1 | 2 | 3 |
| 4 | 5 | 6 |
| 7 | 8 | 9 |
WHO•INPUT | WHO INPUT | ANTENNA | |
| 0 |
| |
button | REVERSE | PLAY | FORWARD |
| REC•VCR+ | STOP | PAUSE |
PIP | PIP | SWAP CH CTRL RESET | |
|
|
| |
buttons
The buttons on the remote control that operate the PIP feature include: the four arrow buttons, CH CTRL, PIP, and SWAP.
3.Turn on the VCR.
4.If the picture gets fuzzy, press the TV/VCR button on the VCR.
5.To see a different picture in the PIP window:
•Press the TV button on the remote control.
•Press the WHO•INPUT button on the remote until you see the picture that’s coming from the VCR (PIP VID appears on the screen).
6.To change the picture in the PIP window, you need to change the channel on the VCR because the VCR is the second signal source.
Press the channel buttons on the VCR or on the VCR’s remote control.
7.To change the channel in the main picture, press CH CTRL until the main channel number appears highlighted (yellow). Press the channel up or down button on the remote control.
Note: Channel up and down won’t work correctly when the VID channel is highlighted (yellow).
PIP Buttons: General Explanation
The buttons on the remote control that you’ll use for the PIP feature are explained below:
PIP Press the PIP button to make the PIP window appear on the screen. Press PIP again to remove the window.
Note: If you selected Alternate with PIP button in the PIP Closed- Caption Display menu, press the PIP button when the PIP window is on the screen to see
Arrow buttons (left, right, up, and down) Move the PIP window to
different areas of the screen.
CH CTRL (channel control) Lets you switch channel control between the PIP window and the main picture. To determine whether the remote control is the PIP picture or the main picture, look at the TV screen: the yellow channel number is the one you are controlling. Press CH CTRL to change which picture you’re controlling.
SWAP Switches, or “swaps,” where the two pictures appear on the TV screen. The smaller PIP picture swaps to the main screen and the main picture goes to the little PIP window.
Chapter 3 | 37 |
