SETUP AND CONNECTIONS

ADVANCED CONNECTIONS

Advanced connections give you better sound and video by separating the audio and video signals and enable you to connect multiple components.

This section describes the types of inputs available on the back of your TV and suggests ways you can use them for optimum performance.

Once you have made your connections you will want to program the TV to tune to the correct Video INPUT channel in order to see and hear audio and video from the component. You will program this later in the Interactive Setup.

Back of the TV

The diagram below describes each of the back panel jacks. When connecting A/V cables, be sure to connect corresponding OUTPUTS and INPUTS (Video to Video, Right Audio to Right Audio, etc.).

Input 2 (VIDEO or Y PB PR)

Connect any of the following components to INPUT 2:

• VCR

• Internet Access Device

• Laserdisc Player

• DVD Player

Satellite Receiver

 

Input 1

The Y, PB, PR jacks are used in place of the VIDEO jack to connect

Connect any of the following components:

an optional component video source, such as a DVD player. Unlike

a single video input, the Y, PB, PR jacks maintain the video signal as

• VCR

• Internet Access Device

three separate signals through these three jacks. To ensure

• Laserdisc Player

• DVD Player

maximum picture quality, use three video-grade cables for the Y,

• Satellite Receiver

 

PB, and PR connections.

To view the component connected to Input 1:

To View the component connected to Input 2:

Use the WHO•INPUT button on the remote.

Use the WHO•INPUT button on the remote.

 

 

 

External Speaker Jacks

 

 

 

Use to connect external

S-Video

 

 

speakers for surround

R

L

G-LINK

sound. Make sure the

 

This optional

 

 

Speaker Selection is set

connection can be

PRPBY

to EXTERNAL.

used for better

 

 

 

 

 

video quality

 

 

 

picture.

 

 

G-LINK

 

 

 

Connect the G-LINK

 

 

 

cable for one-

Audio Outputs

 

Cable/Antenna

button recording

 

and channel tuning

 

 

 

Connect to an audio receiver

Takes the signal input from a cable,

from the Guide.

or amplifier for variable

cable box, or an off-air antenna. Can

 

controlled or fixed level

also be used for basic component

 

stereo output.

connections.

 

6

Page 8
Image 8
RCA F36715, F32715 manual Advanced Connections, Back of the TV