RCA GES050 user manual Table of Contents First Things First

Table of Contents

First Things First

EN

FCC Information
Table of Contents	1
First Things First	2
Tools Required	2
Parts Packed with Your Unit	2
Before Mounting	2
Mounting Procedure	3
Before Plug-In	6
Automatic Time Set	6
Selecting Time Zone	6
Daylight Saving Time (DST)	6
U.S. Time Zone (Figure 1)	7
Canadian Time Zone (Figure 2)	7
Battery Backup Operation	8
Installing Backup Battery	8
General Controls	9
Main Unit	9
Side Views	9
In Battery Compartment	9
The Remote Control	10
Display	11
Settings	11
Setting the Time	11

Adjusting Volume	12
Selecting Radio/TV Band	12
Tuning to a Station/Channel	12
Automatic Station/Channel Search 12
Radio Frequency Memory	13
Memory Recall	13
TV Band	13
Using the Weather Band	13
CD Player	14
Selecting CD Player	14
Loading CD Disc	14
Play and Pause Playback	14
Skip and Search Tracks	14
End Playback	14
Repeat and Random Playback	14
Using the Countertop Light	15
Replacing the Bulb	15
Display Brightness	15
Troubleshooting Tips	16
Remote Control	16
Care and Maintenance	17
Precautions	17
Cleaning the Exterior	17
Handling Compact Discs	17
Cleaning Compact Discs	17
CD Lens Care	17

Under Cabinet Mounting Instructions

Tools Required

•Drill and 1/4" Drill Bit

•Ruler or Tape Measure

•Nail or Awl

•Scissors

•Screwdriver - Phillips

•Countersink (Optional)

•Masking Tape

•Safety Glasses

Parts Packed with your Unit

Spacers

3 — 1/4"

3 — 1/2"3 — Washers

3 — 1"

USE:

3 — 2 3/4" Phillips head screws

or

3 — 1 5/8" Phillips head screws

Before Mounting

Empty contents of the selected cabinet under which the unit will be mounted and thoroughly clean the underside of the cabinet to remove any grease residue which might be present.

We recommend the unit be mounted at the front edge of the cabinet.

Important: For secure mounting, the screws must go into the radio to a depth of at least 3/8". If the overall length from the bottom of the cabinet shelf to the bottom of the overhang is more than 1 3/4", then a wood shim will be necessary. A shim can be made from a sheet of plywood, using the Template to locate the central lines for drilling the 1/4" mounting holes. The shim can be located between the cabinet shelf bottom and spacers. Make sure the wood is at least as thick as the excess over 1 3/4" If a shim is necessary, longer screws are required. Longer screws (Type #10-32) are available at most local hardware stores.

Cut out the Template on the line indicated. The Template size and screw hole positions are identical to the top of the clock radio.

EN

Setting the Countdown Timer	....... 11
Radio	12
Built-In AFC	12
Antennas	12
Turning On the Radio	12
Turning Off the Radio	12

U.S. Warranty 18

2 — Cord hooks

	outCuton solid black line.	sobreCortela línea sólida negra.	Cut out on solid black line.		Corte sobre la línea sólida negra.	Cut out on solid blackline. Corte sobre la líneasólidanegra.
1 — Mounting			el borde delantero del cabinete.
			shouldIf	be even with front edge of cabinet.
template			no overhang, front edge of templet
			Si no hay una parte sobresaliente la parte
			delantera de la plantilla debe ser igual con
			FRONT		FRENTE
		Fold guidelines for cabinet with overhang.			Líneas de guía para ser dobladas en la parte sobresaliente de los gabinetes.
			Cut out on solid black line.		Corte sobre la línea sólida negra.

1

2